How to Clean Kitchen Faucet Head

How to Clean Kitchen Faucet Head

There are many ways to clean a kitchen faucet head. One method is using a scrub brush. To do this, unscrew the mill head cover and remove the bristles. Dirt and debris can be removed this way. Wipe off the bristles with a rag after each use. Another way to clean the main is to use a caustic cleaner.

What is a kitchen faucet head, and why should it be cleaned?

A kitchen faucet head is a component of most kitchen sinks that supplies aqua to the sink. Over time, minerals and food residue can accumulate on the main and cause it to become clogged with dirt and grime. A blocked main will not allow aqua to flow freely, which can lead to decreased water pressure and reduced efficiency in your sink. 

Clear any obstructions from the drainage hole. This includes anything that may have been pulled into the hole by accident, such as toothpicks or small pieces of plastic.

Pour a pot of hot soapy aqua into the sink. Turn on the mill so that aqua flows through the main. Use a soft-bristled brush to scrub the entire surface of the head.

Cleaning Instructions

When it comes to keeping your kitchen looking its best, it’s important to keep your faucet clean. Here are cleaning instructions for your kitchen mill main: 

1. Open the faucet and turn off the aqua supply. 

2. Clean the spout and aerator with a soft cloth or a toothbrush. If there is a build-up on the inside of the spout, use a cotton swab dampened with dishwashing soap to remove it. 

3. Clean the aerator screen with a soft cloth or a toothbrush if necessary. 

4. Remove any mineral deposits from around the base of the main using a soft cloth dampened with warm water and baking soda; rinse well. 

5. Wipe down all surfaces of the mill body using a dry cloth or paper towel.

The Tools You’ll Need

When it comes to cleaning your kitchen faucet head, there are a few key tools that you’ll need. 

First and foremost, you’ll need a plunger. This is the tool that will help you remove all of the built-up dirt and debris from the main of your mill. 

If your main doesn’t have a plunger, you can use a brush to scrub the head clean. Just be sure to use caution not to scratch or damage the finish. 

Another tool that you’ll need is a bucket. fill it with hot aqua and add some white vinegar or baking soda for scrubs. Make sure to rinse the main off after using these cleaners, as they will leave behind residue.

Pour the hot faucet water on the faucet head.

If you’re like most people, your kitchen mill is likely one of the more heavily-used fixtures in your home. And given that it’s usually right near the sink, it’s also one of the most likely places for bacteria and other contaminants to accumulate. That’s why it’s important to keep your kitchen faucet clean on a regular basis – not just to avoid any potential health risks, but also because dirty aqua coming out of a dirty main can actually make your sink worse off. 

Pour a pot of hot aqua onto the mill head and turn on the cold aqua supply. wait about two minutes for the hot water to reach Room Temperature before using it.

Vinegar can be used to mix.

If your kitchen mill is not spraying aqua properly or if it is difficult to clean, then you may need to replace the main. Replacing the   is a fairly easy task, but before doing so, you can try using vinegar to mix with aqua and remove built-up gunk. 

1. Turn off the aqua supply to the kitchen faucet by turning the valve to the “off” position. 

2. Remove any dish towels or rags that are covering the mill head and surrounding area. These items will obstruct the flow of vinegar and water. 

3. Pour about 1/2 cup of white vinegar into a spray bottle filled with cold aqua. 

Use a rag to clean a messy faucet.

Cleaning a kitchen main head can be a chore, but using a rag is the most efficient way to do it. Here’s how: 

1. Wet the rag and wring it out completely. 

2. Locate the mill head and hold it steady while you scrub the area around the spout with suds from the wet rag. Keep working your way around the circumference of the main until all of the gunk has been removed. 

3. If there are any stubborn spots, use a toothbrush to scrape them off. Be sure not to hit any connectors or other delicate parts on the mill main with your toothbrush! 

4. Rinse off the rag and towel dry before neatly folding them up and placing them back in their drawer or on top of the sink.

Scrub gunk-filled holes in your faucet with vinegar.

If your kitchen faucet is covered in gunk, it’s time to take some action. Main over to any home improvement store and pick up a bottle of vinegar. Pour about two tablespoons into the faucet’s drain and turn on the aqua. Allow the vinegar to do its job for a few minutes, then use a plunger to suction onto the drain and clear out all of the gunk. If you’re having trouble getting rid of stubborn bits of residue, try using a wire brush to scrub it away. Once your kitchen mill is clean, give it a good rinse with cold water and dry off completely before replacing the rubber washer and metal washer.

Use a toothbrush to clean out the little holes.

If you have a kitchen faucet with a main, there are often little holes in the head where water flows out. These holes can get clogged with food debris and other gunk, which can lead to poor aqua flow and general dirtiness. To clean out the little holes on your kitchen faucet main, use a toothbrush! Simply insert the brush into one of the holes and use your finger to scrub around the inside of the hole. Be sure to get into all of the nooks and crannies. Once you’ve cleaned out all of the debris, rinse off the toothbrush and let it dry.

Use a pick to remove the remaining gunk.

Removing gunk and plaque from kitchen head main can be a daunting task. But with a bit of know-how, it’s easy to remove the built-up gunk and restore your faucet to its former glory. Here are some easy steps for cleaning your kitchen mill head: 

1) Turn off the water supply to the faucet and unscrew the aerator if present. 

2) Using a pick or plunger, remove any residue or buildup inside of the spout. 

3) Wipe down the exterior of the spout with a dry cloth or paper towel. 

4) Reattach the aerator and screw it in place. 

5) Turn on the aqua supply to the main and check for leaks.

Easily cleaning up your faucet head at home is simple!

Are you tired of trying to clean your kitchen faucet main every time you use it? You don’t have to be! Here are some easy steps on how to clean your kitchen main head: 

1. Turn off the aqua supply to the faucet. 

2. Remove the cartridge and washer by unscrewing them from the stem. 

3. Pour a small amount of dishwashing soap into a basin or cup. Add hot aqua and scrub the inside of the mill spout, drain hole, and any other areas where soap may have accumulated. Use a cloth or sponge to remove any excess soap. 

4. Rinse the entire mill main and cartridge with cool aqua, then replace them with new washers and cartridges if needed. 


Cleaning your kitchen faucet main is easy with these simple steps. Make sure to use the right cleaner and sponge, and take care not to scratch the surface. Use a lint-free cloth to wipe down the head and surrounding areas. Finally, use a fresh dry cloth to buff away any residue. These tips will help keep your kitchen mill looking and running like new!

Scroll to Top